A musty smell with nothing to see is common in Southern California homes, and it usually points to something damp that is hidden. Here is how to narrow it down, what to try first, and when a local mold company can help.
You walk in after a weekend away and the house smells like a damp basement, except that most Los Angeles homes do not have a basement. You check the bathroom, the window sills and under the sink, and everything looks fine. The smell is still there. This guide covers the usual reasons, the places to look, and a sensible order of steps.
What the smell usually means
A musty or earthy odor often comes from damp material, not from visible growth. CDPH advises removing porous materials that look or smell moldy, and treats smell as a clue worth acting on. EPA says the key to mold control is moisture control, so the working question is not "where is the mold" but "where is the water."
The smell can also have other sources. A dirty AC drain pan, a refrigerator drip tray, old carpet padding, a damp towel in a closed laundry hamper, a sewer-trap that has dried out, or stored cardboard can all smell musty. Mold is one candidate, but not the only one, and it is worth ruling out the simple ones first. Be honest about what you can and cannot tell by nose: odor alone does not confirm that mold is present, and it does not tell you how much.
If you have health concerns that seem tied to the smell, talk with your doctor. CDC says exposure to damp and moldy environments may cause a variety of health effects, or none at all.
Start with the easy checks
- Note when it smells most: after a shower, when the AC runs, after rain, in the morning, or all the time. Timing points toward the source.
- Walk the house room by room with the windows closed for ten minutes first, then sniff near floors, closets, cabinets and vents.
- Pull out items stored in the area: boxes, rugs, bags and shoes. Cardboard and fabric hold odor and also hold moisture.
- Run a small humidity meter in the room for a day or two. EPA advises keeping indoor relative humidity below 60 percent, ideally between 30 and 50 percent. A reading that stays high tells you moisture is present.
- Look for the small clues: paint that bubbles, wallpaper or baseboards that lift, a stain that comes and goes, or a floor that feels cool and slightly soft.
Hidden places to check in Los Angeles homes
Under the house
Many older homes sit on a raised foundation with a crawl space. A slow plumbing leak, poor drainage or no vapor barrier can leave the soil and wood framing damp, and the smell rises into the rooms above through floor gaps and ducts. Our guide to crawl space mold under raised-foundation homes explains what to look for there, and the page on crawl space and attic mold removal covers the service.
Inside walls
A supply line, drain or shower valve can leak inside a wall for months. The wall looks normal, and the first sign is a smell. Check the walls behind showers, kitchen sinks, washing machines and water heaters. A moisture meter reading higher than the rest of the wall is a strong hint. See mold in walls for more.
Slab leaks and floors
In slab-on-grade tract homes, a leak in a pipe under the floor can dampen the slab, the carpet pad and the bottom of the walls. Signs include a warm spot on the floor, a water meter that moves when everything is off, or a musty smell strongest at floor level in one area. Carpet and pad are worth lifting at a corner to check the underside.
AC system and ducts
Air conditioning is common in the valleys and inland areas. A clogged condensate drain, wet insulation on ducts in the attic, or a dirty coil can make the whole house smell musty when the system starts. If the smell appears mostly when the AC runs, look at the drain pan and the access panel at the air handler, and see our page on AC and duct mold.
Attic and roof
Winter storms find small roof leaks. Water travels along rafters and shows up at a ceiling days or weeks later, or does not show at all if it soaks into insulation. Check the attic after rain with a flashlight for damp insulation, dark staining on the underside of the roof deck and wet wood around vents.
Coastal rooms and closets
Near the ocean, closets on exterior walls, cabinets against cool walls and rooms with little air movement stay damp. We wrote about this in bathroom and window mold near the coast. Leave closet doors slightly open, keep clothes off the wall, and avoid packing cardboard against exterior walls.
After a leak, flood or fire
Firefighting water and burst pipes leave materials wet behind finishes. EPA and CDC both advise drying water-damaged areas fully within 24 to 48 hours. If something was wet and not dried properly, a smell weeks later is a reasonable result. Our guide on the first 48 hours after a leak covers what to do right after.
Should you test the air?
Many people reach for a test kit. Be careful with this. CDC does not recommend mold testing and says there are no set standards for what is an acceptable quantity of mold in a home, and CDPH does not recommend testing and says measuring molds does not tell you if there is a health problem. A kit can show spores that are in every home. It will not find a hidden leak.
A better first step is an inspection that looks for moisture: a person with a moisture meter, a thermal camera and a flashlight, who opens access panels, checks the roof and plumbing and tells you where the water is going. Our guide on inspection versus testing goes into this, and the mold inspection service page explains what an inspection includes. Sampling can still be useful in specific cases, such as a documented dispute or a request from an insurer.
What to do once you find the source
- Stop the water. Shut off the valve, fix the leak, repair the roof or drain, or have a plumber trace it.
- Dry the area quickly with fans and a dehumidifier. Materials that stay wet for more than 24 to 48 hours are at higher risk.
- Remove materials that cannot be dried, such as soaked carpet pad, ceiling tile or wet insulation. CDPH recommends removing porous materials that look or smell moldy.
- Clean non-porous surfaces with soap and water. CDPH does not recommend bleach, and EPA does not recommend biocides such as chlorine bleach as routine practice.
- If the affected area is bigger than about 10 square feet, EPA says larger problems call for more extensive guidance. Consider a local mold company at that point.
- Watch the smell and moisture readings for a few weeks after the work.
When to call someone
Call a local mold company if the smell is strong and you cannot find a source, if you can see a stain growing, if you suspect water inside a wall, floor or duct, or if the area is large. A company can open the area, find the extent and explain what removal would involve. For a general starting point, see mold removal and remediation.
California has no state mold license, per CDPH, but contractor license rules apply: CSLB says anyone who contracts for work valued at $1,000 or more in combined labor and materials must hold a current CSLB license. Check the license on the CSLB site before signing. For general cost context, one Los Angeles cost guide lists mold remediation at about $14 to $27 per square foot. Hidden-source jobs vary widely because opening walls and fixing plumbing are separate costs.
If the cause turns out to be a covered water loss, the California Department of Insurance says mold damage caused by a covered peril may be covered under your homeowners policy and advises reporting any water damage claim immediately. Ask your agent before you start repairs.
Renters
If you rent, tell the landlord in writing about the smell and what you found, with dates. California Health and Safety Code 17920.3 lists visible mold growth as a substandard condition when determined by a health officer or code enforcement officer, with an exception for minor mold on surfaces that normally collect moisture. A smell alone is harder to document, so photos of staining, moisture readings and a record of leaks all help. In the City of Los Angeles, the Los Angeles Housing Department takes rental complaints after you have told the landlord. See our California mold rules guide for what to check before hiring.
Frequently asked questions
Can a house smell musty without any mold?
Should I buy an air test kit for a musty smell?
Where does the smell most often come from in Los Angeles homes?
When should I call a local mold company?
Sources
- CDPH: Frequently Asked Questions about Mold
- EPA: A Brief Guide to Mold, Moisture, and Your Home
- EPA: Mold Cleanup in Your Home
- CDC: About Mold and Your Health
- CSLB: What Kind of Contractor Do I Need?
- California Department of Insurance: Residential Property Claims Guide
- California Health and Safety Code Section 17920.3
- Los Angeles Housing Department: Living in Rental Housing
- Mold Remediation Cost in Los Angeles, California
Last updated: