Mold in an AC system usually follows moisture such as a clogged drain or sweating ducts; the fix is the source plus cleaning or replacing parts. Call the number on this page to be connected with a local mold company in Altadena.

Look Before You Call
- Shine a flashlight into a register for dark growth.
- Check the drain pan and line near the air handler.
- Look for wet insulation on ducts in the attic.
- Check ceilings below the unit for stains.
- Photograph anything dark or wet so a company can see what you saw.
Oversized or Short-Cycling Systems
An AC that is too large cools quickly, shuts off and never runs long enough to dehumidify. Coils stay damp, and surfaces near the registers feel cold and clammy. That pattern is a recurring cause of musty air in otherwise normal houses. Humidity control, not just cooling, is what keeps coils clean and dry.
Hillside homes often have air handlers and ducts tucked into crawl spaces and under-floor areas, where runoff and damp soil can wet duct insulation after winter storms.

Useful local contacts for Altadena
Ask any remediation company for its Contractors State License Board number. California has no separate mold license, so the CSLB record is where you confirm a contractor's license for work of $1,000 or more.
Rebuild work after the mold comes out, such as new drywall or framing, may need a permit; the Los Angeles County Building and Safety office is the office for Altadena addresses.
If a landlord won't deal with a leak or mold, the Los Angeles County Department of Public Health takes housing complaints for addresses in Altadena.
Calls from Altadena are often matched with companies that also cover Pasadena, La Canada Flintridge and Sierra Madre.
Clean or Replace?
Metal ducts and coils can often be cleaned with HEPA vacuums and brushes. Fiberglass duct board, internal insulation and flexible duct with mold generally have to be replaced. Replacement raises the price but is often the more lasting fix. Replacement parts are usually the largest variable in these quotes.
What Gets Replaced
Moldy duct insulation, flexible duct runs, filters and sometimes the pan or plenum lining are replaced. Metal trunk lines are cleaned and sealed. Companies usually photograph the findings so you can see what was removed and why. Keep the old parts to look at if you want proof of the damage.
When to Call Promptly
- Water pooled around the air handler.
- Visible growth on coils, pans or duct insulation.
- A musty smell every time the AC runs.
- Ceiling stains under an attic unit.
- Repeated drain clogs.
- Write the date of each service on the unit's label for easy reference.
AC & Duct Mold Removal questions in Altadena
Can I clean mold on vent covers myself?
What about mold on the air handler closet walls?
Can a landlord ignore mold on the AC?
Will a new thermostat setting stop mold?
More mold services in Altadena
AC & Duct Mold Removal nearby
Helpful guides
Sources
- Los Angeles County Public Works Building and Safety
- Los Angeles County Department of Public Health Environmental Health: housing complaints
- CSLB: What kind of contractor do you need?
- California Health and Safety Code 17920.3
- EPA: A Brief Guide to Mold, Moisture and Your Home
- California Department of Public Health: Mold
Last updated: