Mold remediation referrals for Los Angeles & nearby townsCall: (213) 566-8021
(213) 566-8021

Mold in Walls in Burbank, CA

moldremediationlosangelesca.com

If paint is lifting or a cabinet wall smells damp in Burbank, an independent local company can measure what sits behind it.

Leak behind a wall in Burbank?
Call now to be connected with a local mold remediation company in Burbank.
(213) 566-8021

A stain, a bubble in the paint or a musty smell near one wall can mean the cavity behind it is wet. EPA advises fixing the moisture problem first and drying wet materials within 24 to 48 hours. Call the number on this page to be connected with a local mold company in Burbank.

Peeling paint and mold spots below a window, mold in walls in Burbank, CA

Clues that point behind the wall

The surface often gives hints before any growth appears. Paint that blisters or peels, wallpaper seams that lift, a baseboard that feels soft, and a smell that is strongest near one wall are all worth a look. A stain that returns after cleaning usually means the source is still active.

How water gets into walls here

Dry weather does not keep walls dry. Pinhole leaks in copper supply lines, loose shower valves, stucco cracks that let winter rain in, and window frames that stop sealing all feed the cavity. Because the water is hidden, the growth can develop for months.

Homes in Burbank from the 1950s often have original pipes inside the walls, and fittings that old can weep slowly into the cavity without any visible sign.

Around Burbank, long hot stretches keep AC systems busy, and a clogged drain line or an uninsulated duct can dampen the wall beside the air handler.

Call now to be connected with a local mold remediation company in Burbank.
(213) 566-8021
Moldy drywall and studs inside an opened wall, mold in walls in Burbank, CA

Fixing the source is its own item

Removing mold from a wall does not fix the pipe, flashing or crack that fed it. A plumber, roofer or stucco contractor may be needed, and that work is billed separately. A remediation quote that ignores the source is incomplete. Ask who will coordinate the trades so the job does not stall.

Useful local contacts for Burbank

Because California doesn't certify mold remediators as such, ask for the company's Contractors State License Board number and look it up on the CSLB site before anyone opens a wall.

Remediation itself is cleanup, but putting the room back together can be permitted work; ask the contractor whether the City of Burbank Building and Safety Division needs to be involved.

Tenants in much of the county report mold and leaks in rentals to the Los Angeles County Department of Public Health; check with the city whether that covers your Burbank address.

Companies that take calls here usually also work in North Hollywood, Sun Valley and Glendale.

Containment while the wall is open

Opening a wall can stir up dust and spores. A careful crew seals the doorway with plastic, runs air filtration, and may keep the room under negative pressure. Ask how they plan to protect the rest of the house, especially if the HVAC is running. Keep the wall open until you have reviewed the findings.

Fix the cause, then the wall

Repainting or closing up before the source is repaired invites a repeat. Have the plumber, roofer or stucco worker finish first, confirm readings are dry, and only then close the wall. That order is what keeps the problem from returning. Skipping that order is the most common reason mold returns.

More about Burbank

Calls come in from across Burbank, including around Magnolia Park, Rancho Equestrian District, Downtown Burbank.

Median home built in 1958 and about 57.2% of occupied units are renter-occupied.

Mold in Walls questions in Burbank

How do you tell if there is mold inside a wall?
A company reads moisture with a meter, may scan with a thermal camera, and then opens a small inspection hole where the readings are highest. Surface appearance alone does not show what is inside.
Can I just paint over mold on a wall?
Paint will hide it for a while but does not remove the growth or the moisture behind it. EPA advises fixing the water problem and cleaning or removing affected material first.
How big a hole do they cut to check a wall?
Often a small opening, then larger only if the wet area extends. Companies usually cut until they reach dry, clean material on every side.
My landlord says the wall stain is not mold. What can I do?
Put your concern in writing and ask for the source to be checked. California law treats visible mold growth as a substandard condition, and a local company can document what is in the wall.

More mold services in Burbank

Mold in Walls nearby

Call now to be connected with a local mold remediation company in Burbank.
(213) 566-8021

Last updated:

☎ Call (213) 566-8021